PEEK board model and color:
1. PEEK-450G (brown grey/garnet yellow) is made from pure polyetheretherketone resin. It has the best toughness and best impact resistance in all PEEK grades. The PEEK-450G can be sterilized with the most convenient means of disinfection (steam, dry heat, ethanol, and Y-rays), and the raw material composition of the PEEK-450G is manufactured in compliance with EU and US FDA regulations on food suitability, which makes it suitable for The medical, pharmaceutical and food processing industries are very commonly used.
2. PEEK-450FC30 (black) The result of adding PTFE, graphite and carbon fiber makes PEEK-450FC30 a bearing-grade plastic. Its superior friction properties (low coefficient of friction, wear resistance, and high peak pressure limit) make this level of friction application an ideal material.
3, PEEK-450GL30 (brown gray) This material is filled with 30% glass fiber reinforced grade plastic, has better rigidity and creep resistance than PEEK-450G, and better dimensional stability, making structural parts more ideal . At high temperatures can withstand a fixed load for a long time. If PEEK-450GL30 is used as a slide, its adaptability should be carefully examined because the glass fiber scratches the mating surface.
4, PEEK-450CA30 (black) This material is filled with 30% carbon fiber reinforcement, better mechanical properties (higher elastic modulus, mechanical strength and creep) and more wear-resistant than PEEK-450GL30, and carbon fiber reinforced Plastics dissipate heat from the bearing surface more quickly with 3.5 times the thermal conductivity of unreinforced PEEK plastic.
PEEK tube tube applications:
PEEK rods are widely used in the aerospace, medical, pharmaceutical and food processing industries, such as gas analyzers on satellites, heat exchanger blades, and are ideal materials for friction applications because of their superior friction properties. Such as sleeve bearings, sliding bearings, valve seats, seals, wear rings and other pumps.
Third, PEEK specifications: The following units are in mm (mm)
1. PEEK sheet: thickness × length × width
(If it is unsuitable for the above specifications, our company can supply product size length and width specifications can be zero cut)