Service Hotline:

+86-20-37413571/37413581

 

 | EN

No public

Manpower

 

Humanistic care
Manpower policy

Job recruitment

 

 

 

 

 

Service Center

 

Technical question and answer

Industry knowledge

 

 

 

 

 

information 

 

News

 

contact us

 

Contact information

Online message

 

 

 

 

 

PURSUIT OF CUSTOMER SATISFACTION, WE STRIVE TO ACHIEVE, YOUR INSPIRATION AND DESIGN,OURCOMMITMENT TO INTEGRITY AND QUALITY

Pursuit of customer satisfaction, we strive to achieve, your inspiration and design

Our commitment to integrity and quality

NEWS

 

>
>
>
Injection mold customization and processing

Injection mold customization and processing

Page view
[Abstract]:

Injection mold customization can be roughly divided into the following steps:
1. Process analysis of plastic products.
Before the mold design, the designer should fully analyze and study whether the plastic product conforms to the injection molding processing principle, and needs to negotiate with the product designer carefully, and a consensus has been reached. This includes necessary discussions on the geometric shape, dimensional accuracy and appearance requirements of the product, and try to avoid unnecessary complexity in mold manufacturing.
2. Mould structure design.
A set of high-quality injection molds requires not only good processing equipment and skilled injection mold manufacturing workers, but also a very important factor is to have a good mold design. Especially for complex molds, the quality of mold design accounts for mold quality. More than 80%. An excellent mold design is: on the premise of meeting the requirements of the customers, the processing cost is low, the processing difficulty is small, and the processing time is short.
To do this, we must not only fully digest the customer's requirements, but also have an understanding of the injection molding machine, mold structure, processing technology and the mold factory's own processing capabilities. Therefore, to improve the level of mold design, the following points should be done:
1. Understand every detail in the design of each mold and understand the purpose of each part in the mold.
2. When designing, refer to the previous similar designs, and understand the situation in its mold processing and product production, and learn from the experience and lessons.
3. Learn more about the working process of the injection molding machine to deepen the relationship between the mold and the injection molding machine.
4. Get to the factory to understand the process of processed products and recognize the characteristics and limitations of each process.
5. Understand the results of mold trial and mold modification of the mold designed by yourself, and learn lessons.
6. In the design, try to use the more successful mold structure before.
7. Know more about the impact of mold water on products.
8. Research some special mold structures and understand the latest mold technology.
3. Determine the mold material and select standard parts.
In the processing of injection molds, the selection of mold materials must be carried out. In addition to the accuracy and quality of the products, the correct selection must be made in combination with the actual processing and heat treatment capabilities of the mold factory. In addition, in order to shorten the manufacturing cycle, use existing standard parts as much as possible.
4. Parts processing and mold assembly.
Except for the best structure and reasonable tolerance matching during the design, the precision of the mold is very important for parts processing and mold assembly. Therefore, the choice of processing accuracy and processing method occupies an absolute dominant position in mold manufacturing.
The dimensional error of molded products is mainly composed of the following parts:
1. The manufacturing error of the mold is about 1/3
2. The error caused by mold wear is about 1/6
3. The error caused by uneven shrinkage of molded parts is about 1/3
4. The error caused by the inconsistency between the scheduled contraction and the actual contraction is about 1/6
Total error = (1) + (2) + (3) + (4)
Therefore, in order to reduce mold manufacturing errors, the machining accuracy should be improved first. With the use of CNC machine tools, this problem has been well controlled. In addition, in order to prevent errors caused by mold wear and deformation, when molds with high machining accuracy and large product output are required, the key parts such as the cavity and core should be quenched. In the medium and large molds, in order to save materials and facilitate processing and heat treatment, the mosaic structure should be adopted as much as possible in the mold design.
In order to solve the error caused by the uneven shrinkage of the molded part and the inconsistency between the predetermined shrinkage and the actual shrinkage, 1/3 of the product tolerance is generally selected during mold manufacturing as the manufacturing tolerance of the mold. The purpose is to leave a relatively large margin for the subsequent molding process Large adjustment room to solve the error caused by the molding process.
Five, try out.
A set of molds only completes 70% to 80% of the entire manufacturing process from design to assembly. For the errors caused by the inconsistency between the predetermined shrinkage and the actual shrinkage, whether the demolding is smooth or not, the cooling effect, especially the influence of the size, position, and shape of the gate on the accuracy and appearance of the product, must be tested by mold trial. Therefore, mold trial is an indispensable step to check whether the mold is qualified and select the best molding process.

 

Previous article: