PEEK rod model and color:
1. PEEK-450G (brown grey/garnet yellow) is made from pure polyetheretherketone resin. It has the best toughness and best impact resistance in all PEEK grades. PEEK-450G
Can be disinfected using the most convenient means of disinfection (steam, dry heat, ethanol, and Y-rays), and the ingredients of raw materials used to make PEEK-450G comply with the EU and US FDA
With regard to the provisions on food compliance, these characteristics make it suitable for the medical, pharmaceutical and food processing industries.
2. PEEK-450FC30 (black) The result of adding PTFE, graphite and carbon fiber makes PEEK-450FC30 a bearing-grade plastic. Its superior friction properties (low friction
The number, wear resistance, and high peak pressure limit make this level of friction application an ideal material.
3, PEEK-450GL30 (brown gray) This material is filled with 30% glass fiber reinforced grade plastic, has better rigidity and creep resistance than PEEK-450G, and better size
Inch stability, making structural parts ideal. At high temperatures can withstand a fixed load for a long time. If PEEK-450GL30 is used as a slide, it should be carefully checked
Sex, because glass fiber scratches the mating surface.
4. PEEK-450CA30 (black) This material is filled with 30% carbon fiber and has better mechanical properties than PEEK-450GL30 (higher elastic modulus, mechanical strength and creep
Changeable and more abrasion resistant, and carbon fiber reinforced plastic has 3.5 times more thermal conductivity than unreinforced PEEK plastic to dissipate heat from the bearing surface faster.
Third, PEEK specifications: The following units are in mm (mm)
PEEK rods: diameter 5 ~ 200 × 1000 (3000 can be customized according to the required length)